Ac97 Vs Hd Audio Front Panel

Hd Front Panel Audio Module
Ac97 Vs Hd Audio Front Panel Installation
Ac97 Vs Hd Audio Front Panel Load
Ac97 Header
What Is Ac97 Front Panel

AC'97 (Audio Codec '97; also MC'97 for Modem Codec '97) is an audiocodec standard developed by Intel Architecture Labs in 1997. The standard was used in motherboards, modems, and sound cards.

The specification covers two types of component, and the 'AC-link' digital interface between them:

an AC'97 digital controller (DC97), which is built into the southbridge of the chipset, and
an AC'97 audio and modem codec, available from several vendors, which contains the analog components of the architecture.

The AC97 connector is spliced/wired into the HD Audio connector which allows the option to use one or the other audio format. I'm looking for such a cable. I'm trying to avoid having switch out the. If your Audio Manager looks like mine, there is a gear in the top right next to the close and minimize window buttons. I clicked the gear and then changed the 'Connector Settings' from 'HD Audio Front Panel' to 'AC97 Front Panel.'

AC'97 defines a high-quality, 16- or 20-bit audio architecture with 5.1 surround sound support for the PC. AC'97 supports a 96 kHz sampling rate at 20-bit stereo resolution and a 48 kHz sampling rate at 20-bit stereo resolution for multichannel recording and playback.

Integrated audio is implemented with the AC'97 Codec on the motherboard, a Communications and Networking Riser card, or an audio/modem riser card.

In 2004, Intel released Intel High Definition Audio (HD Audio) which is a successor that is not backward compatible with AC'97.^[1] HD Audio has the capability to define up to 15 output channels, but in practice most motherboards provide no more than 8 channels (7.1 surround sound).

Revisions[edit]

AC'97 has had several revisions:^[2]

AC'97 1.x compliant indicates fixed 48K sampling rate operation (non-extended feature set)
AC'97 2.1 compliant indicates extended audio feature set (optional variable rate, multichannel, etc.)
AC'97 2.2 compliant indicates extended audio, enhanced riser audio support, and optional Sony/Philips Digital Interface Format
AC'97 2.3 compliant indicates extended configuration information and optional jack sensing support

AC'97 revision 2.3 enables Plug and Play for the end user. This revision provides means for the audio codec to supply parametric data about its analog interface much like Intel High Definition Audio.

AC-Link[edit]

The AC-Link is a digital link that connects the DC97 (the controller) with the audio 'codecs.' It is composed of five wires: the 12.288 MHz clock, a 48 kHz sync signal, a reset signal, and two data wires which carry the actual audio data: sdata_out and sdata_in. The first four are outputs from the controller, while sdata_in carries input from the codec. The link carries a bidirectional serial data stream at a fixed bitrate (12.288 Mbit/s) between the controller and one or more codecs.

Each 12.288 Mbit/s stream is divided into 256-bit frames (frame frequency is 48 kHz). This is therefore a time-division multiplexing scheme.

Every frame is subdivided in 13 slots. The first (slot 0) is 16 bits long and contains validity flags for the remaining slots, while the remaining 240 bits are divided in twelve 20-bit slots (slots 1–12), used as data slots.

Slots 1, 2 and 12 are used for non-audio data, while slots 3–11 carry up to nine channels of raw pulse-code modulation audio signals. Normally, six channels are used for 5.1 surround sound, and three channels are available for modem use. However, slots can be combined to provide a 96 kHz sampling rate for the L, R and C channels.

Lower sample rates (such as 44.1 kHz) are implemented using a handshake protocol between the controller and codec which skips data during certain frames. (This capability depends on the codec. Alternatively, sample rate conversion could be performed in the DC97 (controller) or in the software driver.)

Codec chips[edit]

Hd Front Panel Audio Module

Codec chips have an AC'97 interface on one side and analog audio interface on the other. They are usually small square chips with 48 pins (48-pin QFP package). They are D/A and A/D or only D/A.

Analog Devices AD1819B, 1881A, 1885, 1886, 1887, 1980, 1981, 1985
AKM (Asahi Kasei Microsystems) AK 4540, 4543, 4544A, 4545
Avance Logic (now Realtek) ALC201A, ALC202/A, ALC650, ALC655, ALC658, ALC101, ALC202A, ALC250, ALC850, ALC888
Conexant Cx20468 - with a modem
Cirrus Logic CrystalWare 4236, CrystalClear SoundFusion CS4297, CS4299
Crystal Semiconductors CS4205, CS4202
C-Media CMI9738, 9739, 9761, 9880
ESS ES1988 (with a modem)
Empia EMP202 (2 channel, 20-bit DAC and 20-bit ADC, full duplex AC'97 2.2 compatible stereo audio CODEC)
Intersil HMP9701 (obsolete, 48 kHz fixed samplerate)
National Semiconductor LM4550, LM49321, LM49350, LM49352
Philips UCB 1400 (with touchscreen controller)
Realtek ALC5610 ALC5611^[3]^[4]^[5]
SigmaTel (now IDT) C-Major STAC 9460 (D/A only), 9461, 9462, 9463, 9200, 9202, 9250, 9251, 9220, 9221, 9223, 9750
Silicon Image Si3024 (mono only)
TriTech Microelectronics TR28022, 28026
Yamaha YMF 743, 752, 753
VIA VT1612, VT1616 (VIA Six-TRAC Vinyl Audio), VT82C686
Winbond W83971
Wolfson Microelectronics WM9701, WM9703, WM9704, WM9705 (w/touchscreen), WM9707, WM9708, WM9709 (DAC only), WM9711, WM9712 (w/touchscreen), WM9713 (w/touchscreen), WM9714

Front panel connector[edit]

Computer motherboards often provide a connector to bring microphone and headphone signals to the computer's front panel with standard color jack. Intel provides a specification for that header; the signal assignments are different for AC'97 and Intel High Definition Audioheaders.^[6]

Operating system support[edit]

AC'97 is supported by most operating systems, such as Windows and Linux. Under DOS, applications access the sound hardware directly instead of through the operating system, and most DOS applications do not support AC'97. 64-bit versions of Windows 7 and later require a third-party driver for AC'97 support.^[7]